The federal discount covers a battery added to existing solar
The Cheaper Home Batteries Program pays 6.8 certificates per usable kilowatt-hour on a new battery installed with a new or an existing solar system, so a home that already has panels earns the same discount as one buying both: $2,652 on 10 kWh and $3,549 on 13.5 kWh for an install by 31 December 2026, and $2,223 on 10 kWh from 1 January 2027. The Clean Energy Regulator counted around 52 per cent of battery installations as of the March quarter of 2026 as retrofits to addresses that already had solar, with no change to the panels.
The conditions are the program's, not the installer's: one battery system per premises, a battery on the Clean Energy Council approved list, an accredited installer, and an inverter the battery connects to that is VPP-capable. There is no income test. The January 2027 guide has the install-date rule.
Two ways a battery joins an existing system
An AC-coupled battery carries its own inverter and connects at the switchboard, so the existing solar inverter stays where it is: Tesla Powerwall 3, Enphase IQ Battery, AlphaESS SMILE, FranklinWH aPower X and Anker SOLIX X1 on this site. A DC-coupled battery shares a hybrid inverter with the panels, so the existing inverter either is that hybrid already or is replaced by one. The table gives each battery's own record.
| Battery | Coupling | What its record says |
|---|---|---|
| Tesla Powerwall 3 | AC-coupled | The Powerwall 3 has its own 10 kW inverter with up to 20 kW of DC solar input, so a new system needs no separate solar inverter; an existing solar system can stay on its inverter and AC-couple. |
| Enphase IQ Battery | AC-coupled | Each IQ Battery 5P carries its own microinverters and delivers 3.84 kW continuous (7.68 kVA for three seconds), so it AC-couples to any solar system, new or old, without a hybrid inverter; backup needs the IQ System Controller 3, sold separately. |
| AlphaESS SMILE | AC-coupled | The SMILE-G3-S5 and SMILE5 are hybrid units that take the solar DC and the battery in one box; the SMILE-B3 Plus and B5 are AC-coupled battery inverters that add storage to an existing solar system of any brand. |
| FranklinWH aPower X | AC-coupled | The aPower X has its own 5 kW battery inverter and connects on the AC side through the aGate gateway, so it joins an existing solar system of any inverter brand without replacing the inverter. |
| Anker SOLIX X1 | AC-coupled | The X1 carries its own power module, so no separate hybrid inverter is bought: the AC-coupled version adds storage beside an existing solar inverter, and the hybrid versions take the panels directly. |
| Sungrow SBR | DC-coupled or all-in-one | The SBR stack connects only to a Sungrow SH single-phase or SH-RT three-phase hybrid inverter; on a home with another brand of inverter the quote must include the SH hybrid as well, which is why the inverter prices page matters as much as the battery price here. |
| BYD Battery-Box | DC-coupled or all-in-one | BYD makes no inverter. |
| GoodWe Lynx | DC-coupled or all-in-one | Lynx Home F Plus+ pairs with GoodWe's own ET (three-phase) and EH or EHB (single-phase) hybrid inverters; the ESA is a single unit with the inverter and BMS built into the head unit and 9 kWh packs beneath it. |
| SolarEdge Home Battery | DC-coupled or all-in-one | Runs only on SolarEdge's single-phase Energy Hub or Home Hub inverter (backup needs the Backup Interface); it does not pair with other brands' hybrids, so it is a choice for a SolarEdge optimiser system, not a battery to add to a Fronius or Sungrow roof. |
| Sigenergy SigenStor | DC-coupled or all-in-one | The SigenStor carries its own inverter in the Energy Controller on top of the stack, so a new system needs no separate hybrid inverter. |
| Fox ESS Battery | DC-coupled or all-in-one | A Fox ESS battery needs a Fox ESS hybrid inverter, so its price joins the quote on a home that has none. |
| Fronius Reserva | DC-coupled or all-in-one | The Reserva needs a Fronius GEN24 Plus or Verto Plus hybrid inverter, so it suits a home that has or is buying one. |
Backup in a blackout is separate from coupling: most batteries need a gateway or controller for it, named on each brand page.
What it costs, with and without a new inverter
The price of a retrofit turns on whether the existing inverter stays. The battery-alone rows are this site's typical installed figures, which fit an AC-coupled battery priced as a unit or a home whose inverter is already a hybrid; the complete-system rows are the Why Solar tracker's by-size table, which includes a hybrid inverter where the battery needs one.
| Battery | Installed, before discount | Federal discount | After discount |
|---|---|---|---|
| 10 kWh battery alone | $9,500 to $12,500 | $2,652 | $6,848 to $9,848 |
| 10 kWh complete system, hybrid inverter included where needed | $10,000 to $15,000 | $2,652 | $7,348 to $12,348 |
| 13.5 kWh battery alone | $12,000 to $15,000 | $3,549 | $8,451 to $11,451 |
| 13.5 kWh complete system, hybrid inverter included where needed | $13,500 to $18,500 | $3,549 | $9,951 to $14,951 |
Each size has its own page from 5 kWh to 20 kWh, and the swap itself is priced on inverter replacement.
By the inverter already on the wall
Which route applies depends on the inverter brand and model. One page per brand sets out the range, the batteries whose records name that brand's hybrid, and the swap.
| Inverter brand | DC-coupled batteries | Beside the existing inverter |
|---|---|---|
| Batteries for Fronius | Fronius Reserva and BYD Battery-Box on the GEN24 Plus hybrid | any AC-coupled battery |
| Batteries for Sungrow | Sungrow SBR and BYD Battery-Box on the SH hybrid | any AC-coupled battery |
| Batteries for GoodWe | GoodWe Lynx and BYD Battery-Box on the EH or ET hybrid | any AC-coupled battery |
| Batteries for SMA | none: no battery input | any AC-coupled battery |
| Batteries for Enphase | none: no battery input | any AC-coupled battery |
Whether it pays
A battery earns the gap between the feed-in tariff and the usage rate on each kilowatt-hour it moves from midday export to evening use. A 10 kWh battery cycled once a day moves 3,285 kWh a year: against $6,848 to $9,848 after the discount that is a payback of 5.6 to 8.1 years in South Australia and 10.5 to 15.1 years in Northern Territory. The battery worth-it guide has every state, and the city battery pages show month by month whether an existing array fills a battery in winter.
Questions about adding a battery
Can I add a battery to my existing solar system?
Yes. An AC-coupled battery connects at the switchboard and keeps the existing inverter, and a DC-coupled battery connects through a hybrid inverter; around 52 per cent of batteries installed under the federal program to March 2026 were added to existing solar.
How much does it cost to add a battery to existing solar?
$6,848 to $9,848 for a typical 10 kWh battery installed after the $2,652 federal discount in October 2026; $7,348 to $12,348 where a new hybrid inverter is part of the job.
Do I get the battery rebate if I already have solar panels?
Yes: $2,652 on 10 kWh and $3,549 on 13.5 kWh for an install by 31 December 2026. The federal discount applies to a battery installed with a new or an existing solar system.
Do I need a new inverter to add a battery?
Not with an AC-coupled battery: 5 of the 12 batteries on this site carry their own inverter and connect at the switchboard. A DC-coupled battery needs a hybrid inverter of a matching brand, so an existing string inverter is replaced.
Is it worth adding a battery to existing solar?
5.6 to 8.1 years is the payback on a 10 kWh battery in South Australia after the federal discount, and 10.5 to 15.1 years in Northern Territory, on one full cycle a day at state tariffs.
How much is the battery rebate from 1 January 2027?
$2,223 on 10 kWh from 1 January 2027, down from $2,652, when the factor falls from 6.8 to 5.7 certificates per usable kWh.
