What a 6.6 kW solar system costs in Melbourne
In October 2026 the Solar Choice Melbourne index puts a 6.6 kW system at $6,218 on the standard offer and $7,234 on the premium offer, after the STC discount and including GST; that is 0.94 to 1.10 dollars per watt installed in Melbourne. They are offers submitted by installers to the Solar Choice platform, not quotes received by Melbourne homeowners. No checked Melbourne quotes are counted yet; once the quote check holds ten or more for Melbourne this page will add a quotes series with the median, the quartiles and the count.
| System | Standard offer | Premium offer | STC discount (Zone 4) | $ per watt |
|---|---|---|---|---|
| 5 kW | $5,140 | $5,970 | 29 STCs, $1,131 | 1.03 to 1.19 |
| 6.6 kW | $6,218 | $7,234 | 39 STCs, $1,521 | 0.94 to 1.10 |
| 8 kW | $7,300 | $8,517 | 47 STCs, $1,833 | 0.91 to 1.06 |
| 10 kW | $8,920 | $10,410 | 59 STCs, $2,301 | 0.89 to 1.04 |
| 13 kW | $11,050 | $12,895 | 77 STCs, $3,003 | 0.85 to 0.99 |
| 20 kW | $16,019 | $18,695 | 118 STCs, $4,602 | 0.80 to 0.93 |
The 6.6 kW figure for Melbourne is interpolated between the published 6 kW and 7 kW offers, which is why it is not a round number. Against the neighbours, 6.6 kW costs $1,078 more than 5 kW and $1,082 less than 8 kW on the Melbourne standard offers.
Why 6.6 kW with a 5 kW inverter exists in Melbourne
The Clean Energy Regulator accepts a PV array of up to 133 per cent of the inverter's rated capacity for STC purposes, and 5 kW x 1.33 is 6.65 kW, which rounds to the 6.6 kW array that Melbourne installers quote. This Melbourne page states the rule and attributes it to the CER; the CER guidance page could not be fetched on 27 October 2026, so the source line is marked to be sourced.
The oversize pays in Melbourne because panels are the cheap part of the system and the 5 kVA inverter is the size most networks connect on single phase without a study. In Melbourne a 6.6 kW array earns 39 certificates in Zone 4 against 29 for 5 kW, so the STC discount grows with the panels while the inverter and the connection paperwork stay the same.
At 440 W a 6.6 kW array in Melbourne is 15 panels, 6.6 kW of panels in all, and the installer should state the panel wattage and count on the quote so the array size can be checked against the STC line.
The most quoted size in Melbourne
6.6 kW is the size most Melbourne quotes start from, and the Solar Choice index publishes 6 kW and 7 kW around it rather than 6.6 kW itself. That makes the Melbourne range of $6,218 to $7,234 the most useful single benchmark for a first quote.
A 6.6 kW system in Melbourne produces about 8,672 kWh a year, or 23.8 kWh a day, from 1,314 kWh per kW at Melbourne (Olympic Park). In Melbourne it saves about $1,049 a year at 35 per cent self-consumption, 29 cents grid power and a 3.00 cent feed-in, for a payback of 5.9 years at the standard offer and 6.9 years at the premium offer.
| Month | Jan | Feb | Mar | Apr | May | Jun | Jul | Aug | Sep | Oct | Nov | Dec |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| kWh | 1,189 | 933 | 798 | 531 | 382 | 303 | 348 | 485 | 640 | 876 | 1,009 | 1,180 |
The Melbourne profile peaks at 1,189 kWh in January and bottoms at 303 kWh in June.
Export clipping on a 5 kW inverter in the Melbourne network
Export clipping on a 5 kW inverter in Melbourne is easier to measure than to guess. We take the Melbourne average day of 23.8 kWh from a 6.6 kW array, spread it over a 10 hour half-sine curve, and the modelled peak is 3.74 kW, below the 5 kW inverter rating, so an average Melbourne day loses 0.0 kWh to clipping.
The strongest Melbourne month is January, with 1,189 kWh over the month and a modelled daily peak of 6.02 kW, which clips 2.56 kWh a day; summed over the Melbourne year the model gives 174 kWh clipped, worth $5 at the 3.00 cent feed-in. The window length and curve shape are modelling assumptions written in the page derivations, not measurements; clear Melbourne summer days clip more than the monthly average and cloudy days clip nothing.
CitiPower, the Melbourne distributor, offers flexible export up to 10 kW on the pages we read. Export limits only matter once the inverter is above the cap, so on a 5 kW inverter in Melbourne the inverter rating, not the network, is the ceiling.
Lifetime cost per kWh of 6.6 kW in Melbourne
Across 25 years at 0.5 per cent a year degradation a 6.6 kW array in Melbourne makes about 204,287 kWh, so the standard offer of $6,218 works out at 3.0 cents per kWh and the premium offer at 3.5 cents. Victoria grid power is 29 cents.
| System | 25-year generation | Standard offer | Premium offer |
|---|---|---|---|
| 5 kW | 154,763 kWh | 3.3 c | 3.9 c |
| 6.6 kW | 204,287 kWh | 3.0 c | 3.5 c |
| 8 kW | 247,620 kWh | 2.9 c | 3.4 c |
| 10 kW | 309,525 kWh | 2.9 c | 3.4 c |
| 13 kW | 402,383 kWh | 2.7 c | 3.2 c |
| 20 kW | 619,050 kWh | 2.6 c | 3.0 c |
STC audit for 6.6 kW in Melbourne (Zone 4)
The Melbourne STC count for 6.6 kW is 39: 6.6 x 1.185 (Zone 4) x 5 years = 39.10, rounded down, worth $1,521 at $39 per certificate. For Melbourne our price assumption sits under the 2026-10-19 to 2026-10-23 spot of $39.9 because installers carry a trading cost.
Check the quote: a Melbourne installer whose STC line is 10 per cent or more below $1,521 is pricing the certificates under the market and recovering the gap in the hardware or labour lines, so ask for the certificate count and the price per STC they used. A 2027 install in Melbourne earns 31 certificates worth $1,209 once the deeming period falls to 4 years.
| System | kW x zone factor x years | Certificates (rounded down) | Value in 2026 | From 1 January 2027 |
|---|---|---|---|---|
| 5 kW | 5.0 x 1.185 x 5 = 29.63 | 29 | $1,131 | 23 STCs, $897 |
| 6.6 kW | 6.6 x 1.185 x 5 = 39.10 | 39 | $1,521 | 31 STCs, $1,209 |
| 8 kW | 8.0 x 1.185 x 5 = 47.40 | 47 | $1,833 | 37 STCs, $1,443 |
| 10 kW | 10.0 x 1.185 x 5 = 59.25 | 59 | $2,301 | 47 STCs, $1,833 |
| 13 kW | 13.0 x 1.185 x 5 = 77.03 | 77 | $3,003 | 61 STCs, $2,379 |
| 20 kW | 20.0 x 1.185 x 5 = 118.50 | 118 | $4,602 | 94 STCs, $3,666 |
Network rules in Melbourne: CitiPower
Homes in Melbourne (3004) connect to the CitiPower network, and CitiPower sets the limits that decide which system size is worth paying for.
| Rule | Value |
|---|---|
| Largest inverter on three phase | 30 kVA |
| Flexible (dynamic) export | Yes, up to 10 kW |
Flexible export means CitiPower can raise a Melbourne home's export limit above the static figure when the local network has room, which makes a larger system on single phase easier to justify. The quote should name the export limit the installer applied for.
State support for a 6.6 kW system in Victoria
In Melbourne, as across Victoria: Victoria's Solar Homes Program still pays a rebate of up to $1,400 on a solar panel system for owner-occupiers with a combined household income under $150,000 and a home valued under $3 million, released in monthly allocations; You can add an interest-free loan of up to $1,400; The program runs in its current form until 30 June 2027, when support moves into the Victorian Energy Upgrades program; Rental properties have their own $1,400 stream; Checked at solar.vic.gov.au on 27 October 2026. The STC discount of $1,521 on 6.6 kW in Melbourne is federal and applies on top. Detail on the VIC solar rebates page.
Other system sizes in Melbourne
The 6.6 kW national page compares the eight capitals, and the Melbourne solar prices page carries every size, the price index and the suburb pages for Melbourne. The other five sizes for Melbourne are below.
Get 6.6 kW quotes in Melbourne
Request quotes through Solar Scorecard and we text you first, then pass the enquiry to up to two vetted installers who service Melbourne. If a Melbourne 6.6 kW quote is already on the table, run it through the quote check and it is measured against the $6,218 to $7,234 range and the $1,521 STC line on this page.
6.6 kW in Melbourne: questions
How much does a 6.6kW solar system cost in Melbourne?
$6,218 to $7,234 in Melbourne after the STC discount in October 2026, from the standard to the premium installer offer in the Solar Choice Melbourne index, which is 0.94 to 1.10 dollars per watt.
Why do Melbourne installers quote 6.6kW with a 5kW inverter?
133 per cent is the PV to inverter ratio the Clean Energy Regulator allows for STCs, and 5 kW x 1.33 is 6.65 kW, so 6.6 kW of panels is the largest array that earns full STCs on the 5 kW inverter most Melbourne single-phase homes can connect.
How much does a 6.6kW system generate in Melbourne?
8,672 kWh a year, or 23.8 kWh a day on average, from 1,314 kWh per kW at Melbourne (Olympic Park); January is the strongest month.
How much output is clipped by the 5kW inverter in Melbourne?
0.0 kWh on an average Melbourne day and about 174 kWh a year in our half-sine model, worth $5 at the 3.00 cent feed-in; clear summer days clip more and cloudy days clip nothing.
How many STCs does a 6.6kW system get in Melbourne?
39 certificates for Melbourne in Zone 4, worth $1,521 at $39 each in 2026, and 31 certificates worth $1,209 for installs from 1 January 2027.
What does 6.6kW cost per kWh over its life in Melbourne?
3.0 cents per kWh at the standard offer and 3.5 cents at the premium offer in Melbourne, over 25 years at 0.5 per cent a year degradation, against 29 cents from the Victoria grid.