SolarScorecard
Melbourne · VIC · STC Zone 4 · Prices checked 27 October 2026

10kW Solar System Cost Melbourne: $8,920 to $10,410 after STCs (October 2026)

$8,920 to $10,410 installs a 10 kW solar system in Melbourne in October 2026 after the STC discount: the standard and premium installer offers in the Solar Choice Melbourne index, with STCs valued at $39 each. Output is about 13,140 kWh a year for EV, pool and heat pump loads. Prices checked 27 October 2026.

Updated 27 October 2026 · Prices checked 27 October 2026 · Next review 24 November 2026 · STC price assumed $39

5kW6.6kW10kW+

10 kW in Melbourne at a glance · October 2026

$8,92010kW standard offer
$10,41010kW premium offer
$2,301STC discount, Zone 4
13,140 kWhOutput a year
2.9cLifetime cost per kWh
23Panels at 440 W

What a 10 kW solar system costs in Melbourne

A 10 kW system costs $8,920 to $10,410 installed in Melbourne in October 2026: the standard and premium offers in the Solar Choice Melbourne index, after STCs and GST inclusive, or 0.89 to 1.04 dollars per watt. They are offers submitted by installers to the Solar Choice platform, not quotes received by Melbourne homeowners. No checked Melbourne quotes are counted yet; once the quote check holds ten or more for Melbourne this page will add a quotes series with the median, the quartiles and the count.

Installed solar prices in Melbourne by size, October 2026, after STCs at $39 per certificate
SystemStandard offerPremium offerSTC discount (Zone 4)$ per watt
5 kW$5,140$5,97029 STCs, $1,1311.03 to 1.19
6.6 kW$6,218$7,23439 STCs, $1,5210.94 to 1.10
8 kW$7,300$8,51747 STCs, $1,8330.91 to 1.06
10 kW$8,920$10,41059 STCs, $2,3010.89 to 1.04
13 kW$11,050$12,89577 STCs, $3,0030.85 to 0.99
20 kW$16,019$18,695118 STCs, $4,6020.80 to 0.93

10 kW is a published index size, so the Melbourne figure is not interpolated. At 440 W it is 23 panels (10.12 kW of panels), and it makes about 13,140 kWh a year in Melbourne, or 36.0 kWh a day.

EV, pool and heat pump loads: what 10 kW covers in Melbourne

Ten kilowatts in Melbourne is sized for the loads that arrive after the panels: an electric car, a pool pump and a heat pump for hot water or heating. An EV driven 12,000 km a year at 15 kWh per 100 km uses about 1,800 kWh, which is 14 per cent of the 13,140 kWh a 10 kW array makes in Melbourne; both figures are our derivation and are written in the page source.

Those loads matter because the value of a 10 kW system in Melbourne depends on using the output at home at 29 cents rather than exporting it at 3.00 cents. At 35 per cent self-consumption the saving is $1,590 a year and payback is 5.6 to 6.5 years; charging the car and heating water in daylight lifts the share above 35 per cent and shortens the Melbourne payback.

Estimated monthly output of a 10 kW north-facing system in Melbourne, kWh
MonthJanFebMarAprMayJunJulAugSepOctNovDec
kWh1,8021,4141,2098055794595277359701,3271,5291,788

Export limiting devices for 10 kW in Melbourne

An export limiter is a meter and a setting that stops the inverter pushing more than the agreed kilowatts into the grid, and in Melbourne it costs $200 to $500 installed on the sourced range. It is how a 10 kW array connects on single phase in Melbourne without a network study.

CitiPower publishes no fixed single-phase export figure on the pages we could fetch for Melbourne, so the limiter setting comes from the connection approval. CitiPower offers flexible export up to 10 kW, which lets a Melbourne 10 kW system export above the static cap when the local network has room; the dynamic export device is the same hardware class. The Melbourne quote should list the limiter as its own line and state the export setting applied for.

When three phase is required for 10 kW in Melbourne

A 10 kW array in Melbourne needs an inverter of at least 7.52 kW under the 133 per cent rule, and that is double the 5 kVA most networks connect on single phase without a study. CitiPower, the Melbourne distributor, offers flexible export up to 10 kW on the pages we read.

Where the Melbourne home already has three phase, the three-phase inverter adds $375 to $1,500 on the sourced range and spreads the 13,140 kWh across the phases. Converting a single-phase Melbourne home to three phase is a separate electrical job with no sourced price in our data, so it is not priced here.

Cost per watt falls with size in Melbourne

The Melbourne standard offers fall from 1.03 dollars per watt at 5 kW to 0.94 at 6.6 kW, 0.89 at 10 kW, 0.85 at 13 kW and 0.80 at 20 kW, because the inverter, the crew day and the connection paperwork are spread over more panels. Over 25 years a 10 kW system in Melbourne makes about 309,525 kWh, which puts the standard offer at 2.9 cents per kWh and the premium offer at 3.4 cents, against 29 cents from the Victoria grid.

Lifetime cost per kWh in Melbourne by size, 25 years at 0.5 per cent a year degradation
System25-year generationStandard offerPremium offer
5 kW154,763 kWh3.3 c3.9 c
6.6 kW204,287 kWh3.0 c3.5 c
8 kW247,620 kWh2.9 c3.4 c
10 kW309,525 kWh2.9 c3.4 c
13 kW402,383 kWh2.7 c3.2 c
20 kW619,050 kWh2.6 c3.0 c

STC audit for 10 kW in Melbourne (Zone 4)

10 kW in Melbourne is 59 certificates: 10 x 1.185 (Zone 4) x 5 years = 59.25, rounded down, worth $2,301 at $39 per STC. That discount is claimed by the installer and should be the largest deduction line on a Melbourne 10 kW quote.

Measure the Melbourne quote's certificate line against $2,301: 10 per cent or more below it means the certificates are priced under the market and the gap is in the rest of the quote. After 1 January 2027 a 10 kW system in Melbourne earns 47 certificates worth $1,833.

STC certificates and value by size in Melbourne, Zone 4, $39 per certificate
SystemkW x zone factor x yearsCertificates (rounded down)Value in 2026From 1 January 2027
5 kW5.0 x 1.185 x 5 = 29.6329$1,13123 STCs, $897
6.6 kW6.6 x 1.185 x 5 = 39.1039$1,52131 STCs, $1,209
8 kW8.0 x 1.185 x 5 = 47.4047$1,83337 STCs, $1,443
10 kW10.0 x 1.185 x 5 = 59.2559$2,30147 STCs, $1,833
13 kW13.0 x 1.185 x 5 = 77.0377$3,00361 STCs, $2,379
20 kW20.0 x 1.185 x 5 = 118.50118$4,60294 STCs, $3,666

Network rules in Melbourne: CitiPower

Homes in Melbourne (3004) connect to the CitiPower network, and CitiPower sets the limits that decide which system size is worth paying for.

CitiPower connection limits for rooftop solar, checked 27 October 2026
RuleValue
Largest inverter on three phase30 kVA
Flexible (dynamic) exportYes, up to 10 kW

Flexible export means CitiPower can raise a Melbourne home's export limit above the static figure when the local network has room, which makes a larger system on single phase easier to justify. The quote should name the export limit the installer applied for.

State support for a 10 kW system in Victoria

In Melbourne, as across Victoria: Victoria's Solar Homes Program still pays a rebate of up to $1,400 on a solar panel system for owner-occupiers with a combined household income under $150,000 and a home valued under $3 million, released in monthly allocations; You can add an interest-free loan of up to $1,400; The program runs in its current form until 30 June 2027, when support moves into the Victorian Energy Upgrades program; Rental properties have their own $1,400 stream; Checked at solar.vic.gov.au on 27 October 2026. The STC discount of $2,301 on 10 kW in Melbourne is federal and applies on top. Detail on the VIC solar rebates page.

Other system sizes in Melbourne

The 10 kW national page compares the eight capitals, and the Melbourne solar prices page carries every size, the price index and the suburb pages for Melbourne. The other five sizes for Melbourne are below.

Get 10 kW quotes in Melbourne

Request quotes through Solar Scorecard and we text you first, then pass the enquiry to up to two vetted installers who service Melbourne. If a Melbourne 10 kW quote is already on the table, run it through the quote check and it is measured against the $8,920 to $10,410 range and the $2,301 STC line on this page.

10 kW in Melbourne: questions

How much does a 10kW solar system cost in Melbourne?

$8,920 to $10,410 in Melbourne after the STC discount in October 2026, the standard and premium installer offers in the Solar Choice Melbourne index, or 0.89 to 1.04 dollars per watt.

Does a 10kW system need three phase in Melbourne?

7.52 kW is the smallest inverter allowed under 10 kW of panels, so a single-phase Melbourne home needs network approval and export limiting for it, while a three-phase home connects it with a three-phase inverter costing $375 to $1,500 more.

What does an export limiter cost in Melbourne?

$200 to $500 installed on the sourced range, and it holds export at the CitiPower limit so the 10 kW inverter can connect on single phase in Melbourne.

How much power does 10kW make in Melbourne?

13,140 kWh a year, or 36.0 kWh a day, from 1,314 kWh per kW at Melbourne (Olympic Park); an EV doing 12,000 km a year takes about 1,800 kWh of that.

How many STCs does a 10kW system get in Melbourne?

59 certificates for Melbourne in Zone 4, worth $2,301 at $39 each in 2026 and 47 certificates worth $1,833 from 1 January 2027.

Is 10kW cheaper per watt than 6.6kW in Melbourne?

0.89 dollars per watt against 0.94 on the Melbourne standard offers, and 2.9 cents per kWh over 25 years against the grid rate of 29 cents.

Prices checked 27 October 2026 · Next review 24 November 2026 · STC price assumed $39 per certificate · How we source and check these figures

Sixty seconds. Five factors. Your number.

Free, no sign-up, and nobody calls unless you ask for quotes.